MSP430F2121 状态: ACTIVE

产品信息

特性

• Low Supply Voltage Range 1.8 V to 3.6 V
• Ultralow-Power Consumption
  • Active Mode: 250 µA at 1 MHz, 2.2 V
  • Standby Mode: 0.7 µA
  • Off Mode (RAM Retention): 0.1 µA
• Ultrafast Wake-Up From Standby Mode in less than 1 µs
• 16-Bit RISC Architecture, 62.5 ns Instruction Cycle Time
• Basic Clock Module Configurations:
  • Internal Frequencies up to 16MHz with 4 calibrated Frequencies to ±1%
  • 32-kHz Crystal
  • High-Frequency Crystal up to 16MHz
  • Resonator
  • External Clock Source
• 16-Bit Timer_A With Three Capture/Compare Registers
• On-Chip Comparator for Analog Signal Compare Function or Slope A/D Conversion
• Brownout Detector
• Serial Onboard Programming, No External Programming Voltage Needed Programmable Code Protection by Security Fuse
• Bootstrap Loader
• On Chip Emulation Module
• Family Members Include:
       MSP430F2101: 1KB + 256B Flash Memory 128B RAM
       MSP430F2111: 2KB + 256B Flash Memory 128B RAM
       MSP430F2121: 4KB + 256B Flash Memory 256B RAM
       MSP430F2131: 8KB + 256B Flash Memory 256B RAM
• Available in a 20-Pin Plastic Small-Outline Wide Body (SOWB) Package, 20-Pin Plastic Small-Outline Thin (TSSOP) Package, 20-Pin TVSOP and 24-Pin QFN
• For Complete Module Descriptions, Refer to the MSP430x2xx Family User’s Guide

说明

The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1µs.

The MSP430x21x1 series is an ultralow-power mixed signal microcontroller with a built-in 16-bit timer, versatile analog comparator and sixteen I/O pins.

Typical applications include sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system. Stand alone RF sensor front end is another area of application. The analog comparator provides slope A/D conversion capability.