主页 电源管理 AC/DC 和 DC/DC 转换器（集成 FET）
主页
电源管理
AC/DC 和 DC/DC 转换器（集成 FET）
全新

TPS7H4011-SP

预发布

耐辐射 QMLV、4.5V 至 14V 输入、12A 同步降压转换器

立即订购
数据表

TPS7H4011-SP

预发布
数据表 立即订购

产品详情

Rating Space Operating temperature range (°C) 25 to 25 Type Converter Iout (max) (A) 12 Vin (min) (V) 4.5 Vin (max) (V) 14 Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 1000 Features Differential Remote Sense, Enable, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Programmable current limit, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 11.5 Duty cycle (max) (%) 100
Rating Space Operating temperature range (°C) 25 to 25 Type Converter Iout (max) (A) 12 Vin (min) (V) 4.5 Vin (max) (V) 14 Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 1000 Features Differential Remote Sense, Enable, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Programmable current limit, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 11.5 Duty cycle (max) (%) 100
CFP (HLB) 30 151.23232 mm² 19.28 x 7.844
  • Total ionizing dose (TID) characterized
    • Radiation hardness assurance (RHA) availability of up to 100krad(Si)
  • Single-Event Effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
  • Input voltage range from 4.5V to 14V
  • 12A maximum output current
  • High efficiency (typical values for VIN = 12V, VOUT = 3.3V, fSW = 500kHz)
    • 94% at 1A
    • 86% at 9A
    • 82% at 12A
  • Integrated 45mΩ (HS) and 33mΩ (LS) MOSFETs (typ at 12V)
  • Flexible switching frequency options:
    • 100kHz to 1MHz, accurate (±15% or better), adjustable internal oscillator
    • 100kHz to 1MHz external sync capability
    • SYNC pins can be configured 90° out of phase to parallel up to 4 devices
  • 0.6V ± 0.67% voltage reference over line, temperature, and radiation
  • Differential remote sensing
  • Selectable current limit
  • FAULT input pin for flexible fault management
  • Monotonic start-up into prebiased outputs
  • Adjustable slope compensation and soft-start
  • Adjustable input enable and power-good output for power sequencing
  • Power-good output monitor for undervoltage and overvoltage
  • Supports 5V to –5V inverting buck-boost topology
  • Plastic packages outgas tested per ASTM E595
  • Available in military (–55°C to 125°C) temperature range
  • Total ionizing dose (TID) characterized
    • Radiation hardness assurance (RHA) availability of up to 100krad(Si)
  • Single-Event Effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
  • Input voltage range from 4.5V to 14V
  • 12A maximum output current
  • High efficiency (typical values for VIN = 12V, VOUT = 3.3V, fSW = 500kHz)
    • 94% at 1A
    • 86% at 9A
    • 82% at 12A
  • Integrated 45mΩ (HS) and 33mΩ (LS) MOSFETs (typ at 12V)
  • Flexible switching frequency options:
    • 100kHz to 1MHz, accurate (±15% or better), adjustable internal oscillator
    • 100kHz to 1MHz external sync capability
    • SYNC pins can be configured 90° out of phase to parallel up to 4 devices
  • 0.6V ± 0.67% voltage reference over line, temperature, and radiation
  • Differential remote sensing
  • Selectable current limit
  • FAULT input pin for flexible fault management
  • Monotonic start-up into prebiased outputs
  • Adjustable slope compensation and soft-start
  • Adjustable input enable and power-good output for power sequencing
  • Power-good output monitor for undervoltage and overvoltage
  • Supports 5V to –5V inverting buck-boost topology
  • Plastic packages outgas tested per ASTM E595
  • Available in military (–55°C to 125°C) temperature range

The TPS7H4011 is a 14V, 12A synchronous buck converter optimized for use in a space environment. The peak current mode converter obtains high efficiency with good transient performance and reduced component count.

The wide voltage range of the TPS7H4011 enables it to be used as a point of load regulator to convert directly from a 12V or 5V rail. The output voltage start-up ramp is controlled by the SS_TR pin. Power sequencing is possible with the EN and PWRGD pins.

The device can be configured with up-to four devices in parallel without an external clock for increased current capabilities. Additionally, various features are included such as differential remote sensing, selectable current limit, a flexible fault input pin, and configurable compensation.

The TPS7H4011 is a 14V, 12A synchronous buck converter optimized for use in a space environment. The peak current mode converter obtains high efficiency with good transient performance and reduced component count.

The wide voltage range of the TPS7H4011 enables it to be used as a point of load regulator to convert directly from a 12V or 5V rail. The output voltage start-up ramp is controlled by the SS_TR pin. Power sequencing is possible with the EN and PWRGD pins.

The device can be configured with up-to four devices in parallel without an external clock for increased current capabilities. Additionally, various features are included such as differential remote sensing, selectable current limit, a flexible fault input pin, and configurable compensation.

filter 查找其他 AC/DC 和 DC/DC 转换器（集成 FET）
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 4
类型 标题 下载最新的英语版本 日期
* 数据表 TPS7H401 1 -SP and TPS7H401 1 -SEP 4.5V to 14V Input 12 A Radiation Hardened Synchronous Buck Converter 数据表 PDF | HTML 2024年 4月 19日
* 辐射与可靠性报告 TPS7H4011-SP Total Ionizing Dose (TID) Radiation Report PDF | HTML 2024年 4月 24日
EVM 用户指南 TPS7H4011-SP (TPS7H4011EVM-CVAL) 评估模块 PDF | HTML 英语版 PDF | HTML 2024年 4月 26日
证书 TPS7H4011EVM-CVAL EU Declaration of Conformity (DoC) 2024年 2月 21日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

TPS7H4011EVM-CVAL — TPS7H4011-SP 评估模块

TPS7H4011EVM-CVAL 演示了单个 TPS7H4011-SP 降压转换器的运行情况。该板提供可用于组装额外元件的空间，以便对定制配置进行测试；它还提供了跳线和测试点，以便轻松进行器件配置和性能验证。

用户指南: PDF | HTML
英语版: PDF | HTML
TI.com 上无现货
计算工具

TPS7H4011-CALC — TPS7H4011 component calculator

TPS7H4011 component calculator
支持的产品和硬件

支持的产品和硬件

产品
AC/DC 和 DC/DC 转换器（集成 FET）
TPS7H4011-SP — 耐辐射 QMLV、4.5V 至 14V 输入、12A 同步降压转换器
下载
封装 引脚 下载
CFP (HLB) 30 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频